How To Install Safety First Car Seat

Safety 1^st baby car seats are among the most popular options in the market. Not only are they sold at an affordable price, but they are also quite easy to install and customize.

If you’re looking for the best tutorial on how to install safety first car seat, then you’re reading the best guide you’d find on the internet.

The Safety 1^st baby seat is recommended for everyone driving with a baby.

It provides great comfort to the baby seating/sleeping in it and comes with multiple handy features, including storage spaces to keep some essential baby items.

The baby seat can be installed as a rear-facing or front-facing seat. See our guide on Car Safety For Babies and The Best Car Safety Devices To Get For Your Car.

How To Install Safety First Car Seat?

When you buy a Safety 1^st seat, it comes with a user manual that details everything you need to know about using and installing the seat on your vehicle.

Well, there is a pretty lot of information covered in the manual, which may be daunting to read, and as such, here’s a more concise copy that shows you the exact steps to installing your new Safety 1^st seat.

But before proceeding, here are some important things you need to know about using Safety 1^st baby seats:

• Ensure to check your baby’s weight – don’t guess, check and verify the actual weight.
• Your baby’s actual weight is what decides how you install the seat.
• If your state or city has rules for installing baby seats, ensure you play by the rules.

1. Rear-Facing Using The Latch/Seatbelt System

This means installing the Safety 1^st seat in your car’s rear seat using either your car’s seatbelt or Safety First’s latch system.

Using The Latch Belt

Steps:

• Check your user manual to see the prerequisite steps to setting up your Safety 1^st seat.
• Place the seat at your back and adjust the angle to a perfect position using the “Recline” system (available on the seat).
• Route the latch belt through the rear-facing belt path and hook up the belt end to the latch hook in your vehicle seats.
• Take the other loose end of the latch belt, and stretch it a bit to tighten the seat so that it doesn’t shake while you’re driving.

Using Your Vehicle’s Belt

Steps:

• Check your user manual to see the prerequisite steps to setting up your Safety 1^st seat.
• Place the seat at your back and adjust the angle to a perfect position using the “Recline” system (available on the seat).
• Stretch your vehicle’s seat belt and pass it through the rear-facing belt path (at the front side of the safety 1^st’s seat). Hook the belt into the seatbelt hook in your car’s rear seat.
• Lock the seatbelt so it doesn’t try to retrace after you’ve fixed it into the buckle to secure the Safety 1^st seat you just bought.

2. Front-Facing Mode Using The Latch/Seatbelt System

Before you install a baby seat in front-facing mode, your child should have outgrown the rear-facing mode and your vehicle’s latch connectors can control the current weight of your child.

Using The Latch System

Steps:

• Place the seat in your car’s rear seat – in front-facing mode.
• Loosen the tether strap, pass it through the car seat’s headrest and lock it in position at the back of the seat.
• Route the latch belt through the forward-facing belt path (at the rear side of the Safety 1^st’s seat) and lock it with the latch connectors.
• Tighten up the latch belt by pulling up on the free end. Check if the seat is well installed by shaking it a bit to confirm its tightness.

Using Your Vehicle’s Seat Belt

Steps:

• Place the seat in your car’s rear seat – in front-facing mode.
• Loosen the tether strap, pass it through the car seat’s headrest and lock it in position at the back of the seat.
• Pull the seat belt and pass it through the forward-facing belt path (at the rear side of the Safety 1^st’s seat), then lock it into the seat belt buckle.
• Lock the seatbelt so it doesn’t try to retrace after you’ve fixed it into the buckle to secure the Safety 1^st seat you just bought.

3. Convert Booster Mode

This mode is suggested when your child weighs between 40 to 100 lbs. Booster mode is for grown kids that need to stretch their legs fully.

Steps:

• Loosen the harness system (press the adjustment clip) and push the seat’s headrest to the maximum.
• Unbuckle the chest clip and remove the buckle covers.
• Unsnap the fasteners and pull the soft pad to unveil the back frame of the seat.
• Hide the fastener straps into the frame of the seat.
• Pull down the soft pad and snap it in place
• The seat is now in booster mode

Video Guide:

Buy Safety First Car Seat from Amazon or their website

Summary

This is a complete guide on how to install Safety 1^st’s baby seat in your car. The installation mode depends on your baby’s weight and age.